45mm 24V Mini Air Humidifier Mist Maker Air Fogger Water Fountain Pond Atomizer Nebulizer Atomizer Head for Aquarium Pond Fish Tank (Color : Normal, Size : Without Lights)

Specification:Number of atomizing cores: 1Working voltage: greater than or equal to DC24VCurrent: 1AFog output: 500ml/HWorking water temperature: 5℃-55℃Working water level: 40-80MMLine length: 2.5MProduct material: 304 stainless steelProduct size: 45mm*30mm/1.7in*1.18inPackage Includes：1*Mist Maker FoggerPrecautions:-The water surface is higher than the atomizer water level sensor of about 1CM, the atomization effect is suitable, and the water is too deep, then the buoy is needed.-When the nebulizer is stopped, disconnect the power supply and remove the nebulizer from the water.-When the power is on, do not take the atomizer out of the water, or hold it upside down. The atomizer should not be placed on the side of the water.-If the nebulizer is found to be broken, immediately disconnect the power supply and take the nebulizer out of the water to avoid damage to the nebulizer.

• 【Mist Maker Parameter 】Number of atomizing cores: 1; Working voltage: greater than or equal to DC24V; Current: 1A; Mist output:500ML/H; Working water temperature: 5℃-55℃; Working water level: 40-80MM; Wire length: 2.5M.
• 【Protection function 】Double water cut protection, overheat protection, and power reverse connection protection. The surface of the atomizer is equipped with a power-off sensor, which has high sensitivity, will automatically powers off when lack of water. The anti-atomizer sheet is dry.
• 【Easy to Operate】Put mist maker in the water, and plug it in then the mist appears. Copper cavity helps better heat dissipation, and the removable atomizing sheet is easy to replace.
• 【Waterproof & Security】The pond fogger is IP67 waterproof with over-current/heating protection and the length of the power adapter cable is long enough. Automatic induction off water protection. Without worry about the potential danger for secure use.
• 【Applicable Scene】This Ultrasonic mist maker can be used in many horticultural application including hydroponics, propagation, foliar feeding, grow room and greenhouse humidity generation, etc.Pools, gardens, restaurants and other places are also good scenes for using atomizers.